Includes:
Large ratcheting “T” wrench
Large locking tap adapter
Large hex die adapter
Medium ratcheting “T” wrench
Small tap adapter
Medium tap adapter
Medium die adapter
Male extension adapter
Female extension adapter
48 Taps:
5/16-18 NC taper, 5/16-24 NF taper, 3/8-16 NC plug, 3/8-24 NF plug, 7/16-14 NC plug, 7/16-20 NF plug, 1/2-13 NC plug, 1/2-20 NF plug, 1/8-27 NTP, 4-40 taper, 6-32 taper, 8-32 taper, 10-24 taper, 10-32 taper, 12-24 taper, 1/4-20 NC taper, 1/4-28 NF taper, 8x1.25 plug, 9x1.00 plug, 9x1.25 plug, 10x1.25 plug, 10x1.50 plug, 11x1.50 plug, 12x1.50 plug, 12x1.75 plug, 1/8-28 BSP, 3x.50 taper, 3x.60 taper, 4x.70 taper, 4x.75 taper, 5x.80 taper, 5x.90 taper, 6x1.00 taper, 7x1.00 taper, 1/4-19 BSP, 9/16-18 NF plug, 9/16-12 NC plug, 5/8-11 NC plug, 5/8-18 NF plug, 14x1.25 plug, 14x2.00 plug, 16x1.50 plug, 18x1.50 plug, 18x2.50 plug, 16x2.00 plug, 3/4-10 NC plug, 3/4-16 NF plug, 1/4-18 NPT
48 Hex Dies:
4-40 taper, 6-32 taper, 8-32 taper, 10-24 taper, 10-32 taper, 12-24 taper, 1/4-20 NC taper, 1/4-28 NF taper, 5/16-18 NC taper, 5/16-24 NF taper, 3/8-16 NC plug, 3/8-24 NF plug, 7/16-14 NC plug, 7/16-20 NF plug, 1/2-13 NC plug, 1/2-20 NF plug, 9/16-12 NC plug, 9/16-18 NF plug, 5/8-11 NC plug, 5/8-18 NF plug, 3/4-10 NC plug, 3/4-16 NF plug, 1/8-27 NPT, 1/4-18 NPT, 16x1.50 plug, 16x2.00 plug, 18x1.50 plug, 18x2.50 plug, 1/4-19 BSP, 9x1.25 plug, 10x1.25 plug, 10x1.50 plug, 11x1.50 plug, 12x1.50 plug, 12x1.75 plug, 1/8-28 BSP, 14x1.25 plug, 14x2.00 plug, 3x.50 taper, 3x.60 taper, 4x.70 taper, 4x.75 taper, 5x.80 taper, 5x.90 taper, 6x1.00 taper, 7x1.00 taper, 8x1.25 plug, 9x1.00 plug
Sliding T for adapters
4mm hex key
5 screw extractors
Metric thread gauge
SAE thread gauge
Auto locking feature allows for safe removal of tap adapter.
Twist the spring loaded cap for the quick release of large tap adapter.
5 degree ratcheting arc with reversible lever eliminates hand over hand turning.
Extension adapters provide access in tight confined areas.
Extend the length of tap and die system by combining adapters and any standard 3/8" drive extension.
Use with Medium Tap Adapter.
Patented Twist Lock Guide System reduces "back walk" of die guide.
Works on round and hex shaped dies.
Die adapter works with Pass-Thru Ratchet and Socket System as well as Vortex socket accessories.
The most innovative new product introduction for taps and dies in decades.
Ratcheting T-handle action provides unmatched productivity and versatility.
