RectorSeal 1-Qt #5 Pipe Thread Sealant
(12 Cans)

RectorSeal 25300 1 Qt. # 5 Pipe Thread Sealant (12pk)Is a soft-set, slow drying compound which seals, lubricates, and protects threaded pipe and fittings
It can be pressurized immediately for piping up through 2" and 100 psi and is ideal for application with a wide variety of fluids and gases, including potable water application
Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe. Conforms to TT-S-1732For use with potable water (hot or cold)
Lead free and contains no other metals
Brushable from 20 degree F to 140 degree F
Will not dry out in the can
Multipurpose - wide range of service uses
Immediate pressurization on pipe up to 2" and 100 psi
Temperature service range of -50 degree F to 400 degree F
Smooth easy application
For pressure up to 12,000 psi (liquids) and 2,600 psi (gases)
Economical - requires only a small amount
Permits easy break out with no damage to threads
Lubricates and protects threads
Reduces friction to allow tighter joint makeup
DO NOT USE ON ABS - use RectorSeal No. 100 Virgin or RectorSeal T Plus 2.
RectorSeal No. 5 is recommended for pipe carrying:
Acids, Dilute Gasohol (unleaded Gasoline and 10% Alcohol) Natural Gas
Air, Compressed Heating oils Nitrogen, Gaseous
Ammonia- Gaseous, Liquid Helium, Gaseous Petroleum Solvents
Aliphatic Solvents Hydraulic Oils Soap, Liquid
Caustic, Dilute Hydrogen, Gaseous Steam
Cutting Oils (Low Aromatic) Inert Gases Vegetable Oils
Diesel Fuel Oil Kerosene Water (Hot or Cold)
Freons Liquified Petroleum Gases (Butane, Propane, Mixtures)
Gasoline (Leaded Unleaded) Mineral oils
Not recommended for oxygen.