Urethane Supply 5003R11
Use the 6030 Speed Welding Tip with the R11 FiberFlex Round Rod
Note: the R11 FiberFlex Round Rod is 3/16" in diameter and will not work with a standard tube welding tip
Each rod is 1 foot long, and there are 30 rods in a pack.
FiberFlex is formulated with carbon and glass fibers for the strongest, fastest repairs; in many cases eliminating the need for wire mesh re-enforcement
Like our original Uni-Weld Ribbon Rod it sticks to any kind of plastic, but works especially well on TPO's
Cool it off and sand immediately to a fine feather edge
The FiberFlex really is amazing
It's exclusive carbon and glass fiber combination gives FiberFlex the stamina to withstand extreme abuse without breaking
No two-part adhesive matches the resilience and durability of FiberFlex
It's loaded with benefits
It's sticky... even on problem plastics like TPO, TEO and polypropylene
It's strong... special polymer blend formulated to work best on problem plastics... and with the glass fibers and carbon fibers mixed in, you get a killer bond
It's fast... two-parts seem to take forever to cure, but FiberFlex's thermoplastic base hardens in seconds
It's easy... Just grind and apply FiberFlex
No more wasted time with adhesion promoters
It's inexpensive... Unlike two part repair materials, there is no waste with FiberFlex
Every bit of the material is used on the repair
No wasting money on mixer tips
FiberFlex is an improvement over the Uni-Weld Ribbon... not that Uni-Weld ribbon needed improvement
Here is what we did to the Uni-Weld formulation to make the FiberFlex formulation
Uni-Weld ribbon has a lot of fillers added to the mix
That's what gives it the awesome sanding qualities
But, by having the fillers in the mix, it reduces the strength and flexibility
With FiberFlex, we reduced the amount of filler to improve on both the strength AND flexibility
Newer resins in FiberFlex have been optimized to adhere best to the most stubborn TPO's
Carbon fibers AND glass fibers were also added to the mix for still more strength
